spec no: dsae4850 rev no: v.13a date: jan/08/2014 page: 1 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203000696 3.0x2.5mm surface mount led lamp part number: apb3025esgc-f01 high efficiency red super bright green features z 3.0mmx2.5mm smt led, 1.1mm thickness. z bi -color,low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. descriptions z the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. z the super bright green source color devices are made with gallium phosphide green light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsae4850 rev no: v.13a date: jan/08/2014 page: 2 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203000696 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. * luminous intensity value is traceable to the cie127-2007 compliant national standards. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2.forward voltage: +/-0.1v. 3.wavelength value is traceable to the cie127-2007 compliant national standards. 4.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 apb3025esgc-f01 high efficiency red (gaasp/gap) water clear 8 15 120 *3 *8 8 15 *8 *15 super bright green (gap) symbol parameter device typ. max. units test conditions peak peak wavelength high efficiency red super bright green 627 565 nm i f =20ma d [1] dominant wavelength high efficiency red super bright green 617 568 nm i f =20ma ? 1/2 spectral line half-width high efficiency red super bright green 45 30 nm i f =20ma c capacitance high efficiency red super bright green 15 15 pf v f =0v;f=1mhz v f [2] forward voltage high efficiency red super bright green 2 2.2 2.5 2.5 v i f =20ma i r reverse current high efficiency red super bright green 10 10 ua v r = 5v parameter high efficiency red super bright green units power dissipation 75 62.5 mw dc forward current 30 25 ma peak forward current [1] 160 140 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsae4850 rev no: v.13a date: jan/08/2014 page: 3 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203000696 apb3025esgc-f01 high efficiency red
spec no: dsae4850 rev no: v.13a date: jan/08/2014 page: 4 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203000696 super bright green
spec no: dsae4850 rev no: v.13a date: jan/08/2014 page: 5 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203000696 apb3025esgc-f01 reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsae4850 rev no: v.13a date: jan/08/2014 page: 6 of 6 approved: wynec checked: allen liu drawn: l.q.xie erp: 1203000696 packing & label specifications apb3025esgc-f01 terms and conditions for the usage of this document 1.the information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before product ion usage customer should refer to the latest datasheet for the updated specifications. 3.when using the products referenced in this docu ment, please make sure the product is being operated within the environmental and electrical limit s specified in the datasheet. if customer usage exceeds the specified limits, kingbright w ill not be responsible for any subsequent issues. 4.the information in this document applies to typical usage in consumer electronics applications. if customer's application has special reliabilit y requirements or have life-threatening liabilities, such as automotive or medical usage, please co nsult with kingbright representative for further assistance. 5.the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6.all design applications should refer to kingbr ight application notes available at http://www.kingbrightusa.com/applicationnotes
|
